This high-grade carbon steel stock sheet offers exceptional strength and rigidity, engineered for critical pneumatic system components. Its substantial thickness ensures superior load-bearing capacity and long-term operational reliability in demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.973" |
| Length | 25" |
| Width | 47" |
Precision-manufactured to tight tolerances, this 0.973-inch thick carbon steel sheet provides a robust foundation for demanding pneumatic applications. Measuring 25 inches by 47 inches, its inherent tensile strength and stiffness are crucial for components subjected to high pressures and mechanical stress, such as structural supports for pneumatic actuators, heavy-duty housings for valve manifolds, or robust mounting plates for compressors. The carbon steel material ensures excellent wear resistance and durability, contributing to extended service life in challenging industrial settings. Its controlled thickness uniformity minimizes machining variations and ensures consistent performance across manufactured parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Prepare cutting and shaping equipment according to the specified material thickness and desired tolerances. 3. Securely position the sheet for machining operations, ensuring adequate support to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for thick carbon steel. | Employ high-quality, sharp cutting tools specifically designed for heavy gauge carbon steel to ensure clean cuts and prevent excessive heat buildup or tool damage. |
| Inadequate post-machining deburring and edge finishing. | Thoroughly deburr and finish all cut edges to remove sharp protrusions, preventing potential safety hazards and ensuring proper component fitment. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Actuator Mounts, Heavy-Duty Pneumatic Housing Construction, Industrial Compressor Support Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||