This robust 0.971-inch thick polycarbonate sheet provides exceptional impact resistance and optical clarity. Ideal for protective barriers, glazing, and demanding industrial applications where durability is paramount.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.971" |
| Length | 15" |
| Width | 19" |
Built to exacting engineering tolerances, this 0.971" thick polycarbonate sheet offers superior dimensional stability for precise fabrication. Its inherent toughness, high impact strength (Izod notched impact > 50 ft-lb/in), and excellent optical clarity make it suitable for critical applications. The sheet measures 15" in length and 19" in width, conforming to industry standards for raw material consistency. Operating temperature range is typically -40°F to 270°F, with a tensile strength of approximately 9,000 psi.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, avoiding excessive force or stress. 3. Secure the sheet using appropriate mechanical fasteners, ensuring even pressure distribution. Consider expansion gaps based on thermal cycling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and avoid overtightening; allow for thermal expansion. |
| Using incompatible cleaning agents, causing surface degradation. | Employ only mild soap and water or approved polycarbonate cleaners. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards, Protective glazing, Industrial enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||