This robust 0.971" thick carbon steel stock sheet, measuring 40" x 47", is engineered for critical lubricating applications demanding exceptional wear resistance and a smooth, low-friction surface.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.971" |
| Length | 40" |
| Width | 47" |
Built to exacting engineering tolerances, this carbon steel stock sheet is manufactured to precise dimensions of 0.971" thickness, 40" length, and 47" width. The inherent strength and ductility of carbon steel provide superior load-bearing capabilities and resistance to deformation under high pressure. Its composition ensures excellent machinability and weldability, facilitating integration into complex systems. This material is ideal for components requiring consistent lubrication and minimal friction, such as wear plates, bearing surfaces, and guide rails in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean and free of debris. 2. Accurately position the carbon steel stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) based on the application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel for high-pressure lubricating applications. | Always select a steel grade specifically designed for lubricating applications, such as this carbon steel stock sheet, to ensure adequate wear resistance and load capacity. |
| Inadequate surface preparation before installation. | Thoroughly clean and de-grease the installation area and the steel sheet to ensure proper adhesion and prevent premature wear or failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Wear Plates in Conveyor Systems, Bearing Surfaces for Rotating Machinery, Guide Rails in Automated Assembly Lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||