This premium carbon steel stock sheet, precisely manufactured at 0.967 inches thick, offers exceptional strength and durability for demanding pneumatic system components. Its robust material properties ensure longevity and reliability.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.967" |
| Length | 34" |
| Width | 25" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.967 inches, a length of 34 inches, and a width of 25 inches. Engineered from high-grade carbon steel, it exhibits superior tensile strength and yield point, crucial for withstanding high pressures and cyclic loading inherent in pneumatic applications. The material's inherent toughness and resistance to deformation make it ideal for fabricating critical pneumatic components such as valve bodies, cylinders, and housings, ensuring operational integrity and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against required specifications. 2. Precisely cut and machine the sheet to the designed component dimensions using appropriate tooling. 3. Perform deburring and surface finishing to meet pneumatic sealing and operational requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel without verifying grade for pneumatic pressure ratings. | Always confirm the specific carbon steel grade's mechanical properties (tensile strength, yield strength) are adequate for the intended pneumatic pressure and operational environment. |
| Inadequate surface finishing leading to leaks or premature wear. | Ensure all machined surfaces, especially mating or sealing surfaces, are finished to the required surface roughness (Ra) to guarantee proper sealing and minimize friction. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Barrels, Valve Manifolds and Bodies, Pneumatic Control Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||