Premium Aluminum 6061 stock sheet, precisely engineered for demanding abrading and polishing tasks. Its robust alloy composition ensures superior surface finishing capabilities and durability for critical applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.967" |
| Length | 31" |
| Width | 24" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a precise thickness of 0.967 inches, a length of 31 inches, and a width of 24 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and high machinability, making it an ideal substrate for achieving superior finishes in abrading and polishing processes. This sheet is suitable for a wide range of industrial and fabrication uses where consistent material properties are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface intended for abrading or polishing is clean and free of contaminants. 2. Securely fasten the sheet to your work surface or machine bed using appropriate clamping mechanisms. 3. Select the correct abrasive grit or polishing compound for the desired surface finish and begin the process.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessively coarse abrasives on a pre-finished surface. | Start with a finer grit abrasive and progressively move to coarser grits only if necessary to remove significant imperfections. |
| Applying uneven pressure during the abrading or polishing process. | Maintain consistent and uniform pressure across the entire surface to ensure an even finish and prevent localized wear. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Surface preparation for coatings and plating, Creating high-gloss finishes on metal components, Deburring and edge finishing in fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||