This robust brass stock sheet, precisely machined to 0.959" thickness, offers exceptional durability and machinability. Ideal for fabricating critical components requiring superior strength and corrosion resistance.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.959" |
| Length | 48" |
| Width | 20" |
A high-performance industrial component, this brass stock sheet is manufactured from a premium brass alloy, renowned for its excellent tensile strength, ductility, and resistance to corrosion. With dimensions of 0.959" thickness, 48" length, and 20" width, it provides a substantial raw material for a wide array of manufacturing processes. Its inherent properties make it suitable for applications demanding high load-bearing capacity and longevity in diverse environmental conditions, including marine, electrical, and structural uses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before cutting. 2. Employ appropriate cutting tools for brass, ensuring proper lubrication. 3. Deburr all edges thoroughly to prevent material stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without adjustment. | Utilize carbide-tipped or specialized brass cutting tools to prevent excessive heat buildup and maintain edge integrity. |
| Neglecting to deburr sharp edges after cutting. | Always deburr all cut edges smoothly to eliminate stress concentrations that could lead to premature failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty structural components, Marine hardware fabrication, Electrical connector substrates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||