This premium brass stock sheet, engineered for robust performance, is ideal for demanding abrading and polishing tasks. Its substantial thickness and precise dimensions ensure superior material removal and surface finishing.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.957" |
| Length | 16" |
| Width | 22" |
Purpose-built for heavy-duty applications, this brass stock sheet offers exceptional durability and workability. With precise dimensions of 0.957 inches thick, 16 inches in length, and 22 inches in width, it is manufactured from high-grade brass, renowned for its excellent corrosion resistance and non-sparking properties. This makes it an optimal choice for abrasive operations where material integrity and safety are paramount, including metal preparation, deburring, and decorative surface finishing in industrial environments. Its substantial mass allows for effective material removal without excessive wear or deformation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and well-ventilated. 2. Securely fasten the brass stock sheet to your abrading or polishing equipment. 3. Apply appropriate pressure and consistent motion for desired results.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient clamping pressure, leading to sheet movement and uneven abrasion. | Employ robust clamping mechanisms to ensure the brass sheet remains stationary during operation. |
| Applying excessive force, which can lead to premature wear or damage to the brass sheet and underlying surface. | Gradually increase pressure and monitor the material removal rate to achieve optimal results without over-exertion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty metal surface preparation, Industrial deburring operations, Decorative metal finishing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||