This high-strength carbon steel stock sheet, precisely engineered for pneumatic applications, offers exceptional durability and structural integrity for critical components and system housings.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.956" |
| Length | 32" |
| Width | 21" |
Precision-manufactured to tight tolerances, this 0.956-inch thick carbon steel stock sheet measures 32 inches in length and 21 inches in width. Its robust carbon steel composition ensures superior tensile strength and impact resistance, vital for pneumatic cylinder bodies, valve blocks, and air reservoirs. The material's inherent rigidity and resistance to deformation under pressure make it ideal for high-cycle applications where component reliability is paramount. Its uniform thickness guarantees consistent performance and predictable stress distribution within pneumatic assemblies, minimizing failure points.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Precisely cut or machine the sheet to the required dimensions for pneumatic component housing or structural support. 3. Integrate the fabricated components into the pneumatic system, adhering to all safety and design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient material thickness for high-pressure pneumatic applications. | Always verify the required material thickness based on calculated operating pressures and safety factors for the specific pneumatic application. |
| Inadequate surface preparation leading to corrosion or poor adhesion of coatings. | Thoroughly degrease and clean the carbon steel surface before any finishing processes or installation to prevent premature material degradation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Housings, Valve Manifolds and Blocks, Air Reservoir Construction, Pneumatic Control Panel Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||