This robust 0.955" thick Nylon stock sheet offers exceptional durability and impact resistance. Precisely sized at 16" x 23", it's engineered to safeguard valuable goods during transit and storage.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.955" |
| Length | 16" |
| Width | 23" |
A high-performance industrial component, this Nylon stock sheet is engineered with a precise thickness of 0.955 inches, a standard length of 16 inches, and a width of 23 inches. Its inherent high tensile strength, excellent abrasion resistance, and low coefficient of friction make it ideal for applications requiring robust protection against impact and wear. The material's chemical inertness ensures compatibility with a wide range of substances, preventing degradation or contamination. This sheet is a superior choice for custom-cut protective barriers, vibration dampening, and heavy-duty load stabilization.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines on the Nylon stock sheet according to application requirements. 2. Utilize a high-speed industrial saw or laser cutter for precise dimensional accuracy during fabrication. 3. Secure the fabricated Nylon component to the desired substrate using appropriate industrial adhesives or mechanical fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense polymers. | Employ carbide-tipped blades or waterjet cutting for clean, precise edges and to prevent material stress. |
| Over-tightening fasteners, leading to potential cracking or deformation. | Use washers and torque tools to apply even pressure, respecting Nylon's flexibility and preventing stress concentrations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom protective liners for shipping crates, Impact-resistant dunnage and void fill, Wear surfaces and guides in material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||