This premium brass stock sheet is engineered for superior lubrication in demanding industrial environments. Its robust construction and inherent low-friction properties ensure efficient operation and extended equipment life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.955" |
| Length | 47" |
| Width | 27" |
Purpose-built for heavy-duty applications, this brass stock sheet boasts a thickness of 0.955 inches, a substantial length of 47 inches, and a width of 27 inches. Manufactured from high-grade brass, it exhibits excellent machinability, corrosion resistance, and a naturally low coefficient of friction, making it ideal for wear surfaces and sliding components. The material's inherent self-lubricating characteristics minimize friction and heat buildup, crucial for applications involving continuous motion and high loads. Its formability allows for intricate shaping to meet precise engineering requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the intended mounting surface to remove any debris or contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools for brass. 3. Securely fasten the cut brass sheet to the equipment using mechanical fasteners, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for brass, leading to poor edge quality and potential material damage. | Employ specialized cutting tools and techniques recommended for brass to achieve clean, precise cuts and maintain material integrity. |
| Inadequate surface preparation of the mounting area, resulting in poor adhesion or uneven contact. | Ensure the mounting surface is meticulously cleaned and free of grease, oil, or any foreign particles before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: High-load bearing surfaces, Wear plates and guides, Specialized bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||