This lubricating grade brass stock sheet offers exceptional self-lubricating properties, reducing friction and wear in demanding industrial environments. Its precise dimensions ensure seamless integration into complex assemblies.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.954" |
| Length | 37" |
| Width | 41" |
Engineered for reliability and performance, this brass stock sheet boasts a thickness of 0.954 inches, a length of 37 inches, and a width of 41 inches. Composed of a specialized brass alloy, it exhibits inherent low friction characteristics, making it ideal for applications requiring reduced wear and enhanced glide. Its high thermal conductivity aids in heat dissipation, further optimizing performance under continuous operation. This material is rigorously tested for consistency in its tribological properties, ensuring predictable and sustained lubrication throughout its service life in critical mechanical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface ensuring it is clean, flat, and free from debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the prepared brass sheet to the substrate using high-strength adhesives or mechanical fasteners, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Always select a specifically formulated lubricating grade brass stock for components subjected to significant friction or wear. |
| Improper surface preparation leading to poor adhesion or uneven performance. | Thoroughly clean and degrease both the brass sheet and the mounting surface before installation to ensure optimal contact and lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces and bushings, Sliding components and guides, Wear plates and friction reducers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||