This brass stock sheet is engineered for demanding lubricating applications. Its specific composition and dimensions ensure optimal friction reduction and wear resistance in critical industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.951" |
| Length | 42" |
| Width | 25" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.951 inches in thickness, 42 inches in length, and 25 inches in width. Composed of a high-grade brass alloy, it exhibits excellent self-lubricating properties, a low coefficient of friction, and good machinability. These characteristics make it ideal for use in sliding components, bushings, bearings, and other areas requiring reduced wear and smooth operation under load. Its inherent corrosion resistance further enhances its longevity in diverse operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Precisely cut the brass sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the component to its designated mounting point, verifying proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to misaligned components. | Utilize precision cutting tools and jigs to ensure accurate dimensions and square edges, preventing alignment issues. |
| Over-tightening fasteners, causing deformation. | Apply specified torque values during fastening to avoid compromising the structural integrity or smooth operation of the brass component. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear strips and guides, Bearing surfaces in low-speed, high-load applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||