This premium Nylon stock sheet delivers exceptional durability and mechanical strength. Its robust composition makes it an ideal raw material for fabricating robust components in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.945" |
| Length | 32" |
| Width | 41" |
Engineered for reliability and performance, this 0.945" thick Nylon stock sheet measures 32" in length and 41" in width. Manufactured from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction. These properties make it suitable for applications such as wear pads, bushings, gears, and structural components where impact resistance and load-bearing capacity are critical. Its machinability allows for precise customization to meet specific engineering requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the component using industry-standard fasteners or adhesives, ensuring proper torque or bond strength.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for Nylon, leading to melting or poor edge quality. | Utilize sharp, carbide-tipped cutting tools specifically recommended for machining Nylon to achieve clean cuts and avoid heat buildup. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Apply fasteners with appropriate torque settings and consider using washers to distribute load evenly across the surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear-resistant components, Bushings and bearings, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||