This robust Nylon stock sheet, measuring 0.944 inches thick, 26 inches long, and 25 inches wide, is engineered for demanding fabricating tasks requiring superior wear resistance and mechanical strength.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.944" |
| Length | 26" |
| Width | 25" |
Manufactured under strict quality controls, this Nylon stock sheet (0.944" x 26" x 25") exhibits exceptional tensile strength, abrasion resistance, and a low coefficient of friction. Its high impact strength and good chemical resistance make it suitable for components exposed to moderate loads and harsh environments. This material's ability to withstand significant wear without degradation ensures extended service life in critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools (e.g., industrial saws, waterjet). 2. Machine or form the cut pieces according to design specifications, utilizing standard metalworking techniques where applicable. 3. Secure or assemble the fabricated Nylon components using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits for machining Nylon. | Employ specialized drill bits with appropriate point angles and chip clearances designed for plastics to prevent melting and chipping. |
| Over-tightening fasteners, leading to material deformation or cracking. | Use washers and torque wrenches to ensure fasteners are tightened to the recommended specifications, distributing load and preventing stress concentrations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||