This high-density Nylon stock sheet offers exceptional mechanical strength, wear resistance, and chemical inertness. Its robust nature makes it a preferred choice for demanding industrial components and fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.943" |
| Length | 25" |
| Width | 47" |
Trusted by engineers across multiple sectors, this Nylon stock sheet boasts a precise thickness of 0.943 inches, a length of 25 inches, and a width of 47 inches. Manufactured from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction. This material is well-suited for applications requiring robust bearing surfaces, wear pads, and custom-machined parts subjected to significant mechanical stress and chemical exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Accurately cut the Nylon sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut Nylon component to the substrate using recommended mechanical fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers. | Employ sharp, carbide-tipped saw blades or routing bits specifically designed for cutting Nylon to prevent melting and chipping. |
| Over-tightening fasteners, leading to stress concentration. | Use appropriate torque specifications and consider washers to distribute load evenly, avoiding deformation of the Nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Bearing surfaces, Gears and sprockets, Custom-machined components, Electrical insulators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||