This premium brass stock sheet is engineered for superior lubrication and wear resistance. Its substantial thickness and precise dimensions make it ideal for demanding industrial applications requiring reduced friction.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.943" |
| Length | 47" |
| Width | 43" |
Purpose-built for heavy-duty applications, this brass stock sheet boasts a thickness of 0.943 inches, a length of 47 inches, and a width of 43 inches. The material's inherent properties, including its self-lubricating characteristics and excellent machinability, make it the optimal choice for components subjected to significant friction and wear. Its robust composition ensures long service life and reliable performance in high-stress environments, contributing to reduced maintenance cycles and enhanced operational efficiency across various industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, free of debris, and properly prepared for contact. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the installed brass component according to the specific design requirements, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys where lubricating properties are critical. | Always specify and utilize brass alloys specifically formulated for lubricating applications to ensure optimal performance and longevity. |
| Inadequate surface preparation of mating components. | Thoroughly clean and prepare all mating surfaces to guarantee optimal contact and friction reduction. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in heavy machinery, Slide guides and wear plates, Low-friction bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||