This high-performance brass stock sheet is engineered for superior lubricity. Its dense structure and inherent self-lubricating properties make it ideal for friction-critical applications requiring smooth, consistent operation.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.941" |
| Length | 15" |
| Width | 43" |
Manufactured under strict quality controls, this lubricating grade brass stock sheet boasts a precise thickness of 0.941 inches, a length of 15 inches, and a width of 43 inches. The material's composition is optimized for reduced friction and wear, offering excellent thermal conductivity and corrosion resistance. Ideal for bearings, bushings, sliding components, and wear plates in machinery where lubrication is paramount and maintenance is to be minimized.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, flat, and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and adhesive as recommended by the application's engineering requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-wear, low-lubricity applications. | Select lubricating grade brass stock for its inherent self-lubricating properties to prevent premature wear and failure. |
| Inadequate surface preparation before installation. | Thoroughly clean and decontaminate the mounting surface to ensure optimal adhesion and performance of the brass sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: High-performance bearings, Low-friction bushings, Wear plates in automated machinery, Guide rails for sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||