This robust 0.940-inch thick carbon steel stock sheet, measuring 29x42 inches, is engineered for superior performance in high-stress pneumatic system components. Its substantial material properties ensure longevity and reliability.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.940" |
| Length | 29" |
| Width | 42" |
Designed for demanding industrial environments, this carbon steel stock sheet offers exceptional tensile strength and rigidity, crucial for the structural integrity of pneumatic components subjected to high pressures and cyclical loading. With a thickness of 0.940 inches and dimensions of 29 by 42 inches, it provides ample material for fabricating robust housings, mounting brackets, and critical structural elements. The inherent properties of carbon steel ensure excellent machinability and weldability, allowing for precise component creation and reliable assembly within complex pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to cutting. 2. Precisely cut to required component dimensions using appropriate cutting tools. 3. Fabricate and assemble components according to pneumatic system design specifications, ensuring all welds and fasteners meet required standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge steel for high-pressure pneumatic components. | Always select steel with sufficient thickness and appropriate material grade to withstand the operational pressures and stresses of the intended pneumatic application. |
| Inadequate surface preparation before welding or coating. | Thoroughly clean the carbon steel surface to remove all rust, oil, and debris to ensure strong weld penetration and proper adhesion of any protective coatings. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: High-pressure pneumatic cylinder bodies, Robust pneumatic valve actuator housings, Heavy-duty pneumatic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||