This premium brass stock sheet offers exceptional strength and corrosion resistance, making it the ideal material for demanding suspending and bracing applications in industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.936" |
| Length | 13" |
| Width | 14" |
A high-performance industrial component, this brass stock sheet is engineered to exacting standards, measuring 0.936 inches in thickness, 13 inches in length, and 14 inches in width. Composed of a high-grade brass alloy, it exhibits superior tensile strength and excellent resistance to environmental degradation, including galvanic corrosion. Its robust physical properties ensure reliable performance under significant load-bearing conditions, vital for structural integrity in suspending and bracing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and cut the brass stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare mounting surfaces, ensuring they are clean, level, and capable of supporting the intended load. 3. Securely fasten the brass sheet using high-strength, corrosion-resistant fasteners, adhering to all relevant structural engineering codes and best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners which can lead to premature failure. | Always select fasteners with adequate shear and tensile strength, rated for the anticipated loads and compatible with brass. |
| Inadequate surface preparation leading to poor adhesion or uneven load distribution. | Ensure mounting surfaces are free of debris, grease, and moisture before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty structural bracing, Industrial equipment suspension mounts, Custom support framework fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||