This premium Nylon stock sheet, measuring 0.930" thick by 29" x 19", offers exceptional durability and controlled abrasion. Its robust material properties make it ideal for demanding polishing and finishing applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.930" |
| Length | 29" |
| Width | 19" |
Trusted by engineers across multiple sectors, this 0.930" thick Nylon stock sheet exhibits superior wear resistance, excellent chemical inertness, and low coefficient of friction. Precision-cut to 29" x 19", its high tensile strength and impact resistance ensure consistent performance in abrasive environments. Ideal for custom tooling, wear pads, and specialized polishing fixtures where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Position the Nylon stock sheet accurately on the designated area. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to potential delamination or cracking. | Use torque-limiting tools or hand-tighten fasteners gradually, ensuring consistent pressure without over-compression. |
| Improper surface preparation for adhesive bonding, resulting in weak adhesion. | Thoroughly clean and degrease the mounting surface and the Nylon sheet, then apply adhesive according to manufacturer recommendations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Abrasive Media, Wear Strips and Guides, Polishing Fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||