This premium brass stock sheet is engineered for demanding lubricating applications. Its specific alloy composition and precise dimensions ensure optimal friction reduction and wear resistance in critical industrial settings.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.929" |
| Length | 33" |
| Width | 21" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.929 inches, a length of 33 inches, and a width of 21 inches. The inherent properties of brass, including its low coefficient of friction and excellent machinability, make it ideal for self-lubricating components and bearing surfaces. This material exhibits good corrosion resistance and thermal conductivity, ensuring reliable performance in diverse operating environments. Its ductility allows for intricate shaping and fitting within complex machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the target surface thoroughly to remove any contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated brass component to the intended mounting location, ensuring a snug fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or inconsistent edges. | Employ sharp, high-quality cutting tools specifically designed for working with brass, such as abrasive cut-off wheels or band saws with fine-tooth blades. |
| Inadequate surface preparation prior to installation. | Ensure all mating surfaces are free of dirt, grease, and debris to guarantee proper contact and optimal performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in heavy machinery, Self-lubricating bushings and sleeves, Wear plates in sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||