Engineered for demanding environments, this 0.920" thick polycarbonate stock sheet offers exceptional impact resistance and rigidity, making it ideal for critical suspending and bracing solutions.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.920" |
| Length | 31" |
| Width | 43" |
Manufactured under strict quality controls, this 0.920" thick polycarbonate stock sheet exhibits superior impact strength and excellent clarity. Measuring 31" in length and 43" in width, it is formulated to withstand significant mechanical stress, making it a preferred material for structural bracing, support systems, and load-bearing components. Its thermal stability and resistance to a wide range of chemicals ensure long-term performance in diverse industrial settings. The material's inherent toughness minimizes fracture risk, even under extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Accurately mark and pre-drill mounting holes in the polycarbonate sheet, using appropriate drill bit sizes for the chosen fasteners. 3. Securely fasten the sheet to the substrate, ensuring even pressure distribution to avoid stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to potential cracking. | Maintain a minimum edge distance of 2x the hole diameter when drilling. |
| Over-tightening fasteners, causing localized stress and deformation. | Use washers and tighten fasteners until snug, but avoid excessive force. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Structural support elements in machine enclosures, Bracing for temporary or permanent installations, Impact-resistant shielding for dynamic loads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||