This premium brass stock sheet, engineered for lubrication, offers exceptional self-lubricating properties and superior wear resistance. Its robust composition ensures reliable performance in critical sliding and bearing applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.920" |
| Length | 38" |
| Width | 33" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.920 inches, a generous length of 38 inches, and a width of 33 inches. Its inherent machinability and low coefficient of friction make it ideal for bushings, bearings, and sliding components. The material exhibits excellent corrosion resistance and thermal conductivity, ensuring longevity and efficient heat dissipation in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the application. 3. Securely fasten the brass sheet using appropriate industrial adhesives or mechanical fasteners, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong brass alloy for high-stress lubrication. | Verify the specific brass alloy's suitability for the intended load and friction requirements of the application. |
| Improper surface preparation leading to poor adhesion or premature wear. | Thoroughly degrease and clean all mating surfaces before installation to ensure optimal contact and performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bushings and bearings, Wear plates for sliding mechanisms, Self-lubricating machine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||