This 0.917" thick Nylon stock sheet offers exceptional durability and wear resistance. Measuring 32" x 23", it's a robust raw material for fabricating demanding industrial components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.917" |
| Length | 32" |
| Width | 23" |
A proven choice for industrial professionals, this Nylon stock sheet boasts a substantial 0.917" thickness, ensuring high load-bearing capacity and impact resistance. Its dimensions of 32" x 23" provide ample material for custom fabrication. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and good chemical resistance, make it suitable for a wide range of demanding applications. This material is ideal for producing gears, bearings, bushings, and wear pads where longevity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, CNC router) to achieve precise dimensions. 3. Smooth cut edges with a deburring tool or file for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Attempting to cut with standard woodworking blades without proper tooth configuration. | Use blades specifically designed for plastics or non-ferrous metals to prevent melting and chipping. |
| Overheating the material during cutting or machining, leading to deformation. | Employ adequate cooling, such as flood coolant or compressed air, and optimize cutting speeds and feed rates. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Plates and Strips, Custom Bushings and Bearings, Protective Covers and Guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||