This 0.914" thick brass stock sheet offers exceptional strength and corrosion resistance, making it ideal for demanding suspending and bracing applications. Its precise dimensions ensure reliable performance in industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.914" |
| Length | 21" |
| Width | 48" |
Manufactured under strict quality controls, this brass stock sheet boasts a thickness of 0.914 inches, a length of 21 inches, and a width of 48 inches. Composed of a durable brass alloy, it exhibits excellent tensile strength and resistance to environmental degradation, ensuring longevity in structural applications. Its inherent malleability allows for precise fabrication and customization to meet specific project requirements, while its non-sparking nature is advantageous in hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and cut the brass sheet to the required dimensions for bracing or suspending. 2. Securely fasten the brass sheet using appropriate industrial-grade fasteners, ensuring even load distribution. 3. Verify the integrity of the installation and load-bearing capacity before commissioning.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate fastener selection leading to premature failure. | Utilize fasteners specifically rated for the intended load and compatible with brass to prevent galvanic corrosion. |
| Over-tightening fasteners causing deformation or cracking of the brass sheet. | Employ torque wrenches to apply fasteners to the manufacturer's recommended specifications. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Structural bracing in industrial equipment, Custom mounting plates for heavy machinery, Support components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||