This high-grade brass stock sheet, measuring 0.914" in thickness and 43" x 41", is engineered for demanding fabrication tasks. Its superior machinability and corrosion resistance make it a prime choice for critical industrial components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.914" |
| Length | 43" |
| Width | 41" |
Built to exacting engineering tolerances, this brass stock sheet offers exceptional dimensional stability and uniformity. Composed of a standard brass alloy (e.g., C26000 cartridge brass or similar, with typical composition of ~70% copper and ~30% zinc), it exhibits excellent formability, weldability, and a high tensile strength of approximately 40-50 ksi. The precise 0.914" thickness ensures consistent performance in bending, stamping, and machining operations. Suitable for applications requiring good electrical conductivity and moderate corrosion resistance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and well-lit. 2. Accurately measure and mark cut lines on the brass sheet using appropriate layout tools. 3. Employ suitable cutting methods (e.g., shearing, sawing) to achieve precise dimensions, maintaining burr-free edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to ragged edges and increased material waste. | Utilize sharp, high-quality cutting blades or bits designed for brass to ensure clean cuts and extend tool life. |
| Improper handling causing scratches or dents on the surface, compromising aesthetic and functional integrity. | Employ protective coverings or lift sheets during handling and transport, and avoid abrasive contact. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and terminals, Heat exchangers and plumbing components, Decorative and architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||