This premium Nylon stock sheet provides exceptional durability and impact resistance. Its robust material composition makes it ideal for critical safety applications where reliability and longevity are paramount.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.905" |
| Length | 24" |
| Width | 37" |
Precision-manufactured to tight tolerances, this 0.905-inch thick Nylon stock sheet measures 24 inches by 37 inches. Exhibiting a high tensile strength, excellent abrasion resistance, and superior impact toughness, this material is engineered to withstand severe operating conditions. Its low coefficient of friction and good chemical resistance further enhance its suitability for a wide array of industrial environments. Ideal for wear pads, impact guards, and custom fabricated safety components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely mark and drill mounting holes according to design specifications. 3. Securely fasten the Nylon stock sheet using appropriate industrial-grade hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrect fasteners. | Utilize fasteners with adequate shear strength and appropriate diameter to ensure secure mounting and prevent premature failure. |
| Over-tightening fasteners, leading to material deformation. | Apply torque specifications recommended for Nylon to avoid stress concentrations and cracking. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Impact protection barriers, Wear-resistant machine components, Custom safety guards and shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||