This heavy-duty carbon steel stock sheet, engineered for lubricating applications, offers exceptional durability and wear resistance. Its precise dimensions ensure seamless integration into industrial machinery and processes.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.905" |
| Length | 18" |
| Width | 13" |
A high-performance industrial component, this 0.905-inch thick carbon steel stock sheet boasts a robust build ideal for applications requiring friction reduction and component protection. Manufactured from high-grade carbon steel, it exhibits superior tensile strength and hardness, ensuring longevity under significant operational stress. The dimensions of 18 inches in length and 13 inches in width provide ample surface area for fabrication into various wear plates, guides, and sliding mechanisms. Its inherent lubricity, when properly treated or integrated into a lubrication system, minimizes wear and heat generation in critical moving parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the carbon steel sheet thoroughly to remove any oil, grease, or debris. 2. Accurately measure and mark the required dimensions for cutting or shaping. 3. Fabricate the component according to design specifications, ensuring precise tolerances. 4. Apply appropriate lubrication as per the application's requirements before or during operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation. | Ensure all surfaces are meticulously cleaned and degreased to promote optimal adhesion and performance of any applied lubricants or coatings. |
| Overlooking material compatibility with the lubrication system. | Verify that the carbon steel is compatible with the specific lubricants and operating environment to prevent premature degradation or contamination. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Wear plates for sliding mechanisms, Lubricated guide rails, Anti-friction component fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||