This premium brass stock sheet, precisely engineered at 0.904" thickness, offers exceptional durability and stability for critical measuring and inspecting tasks. Its robust brass composition ensures longevity and reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.904" |
| Length | 17" |
| Width | 42" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to exacting standards, featuring a precise thickness of 0.904 inches, a length of 17 inches, and a width of 42 inches. The inherent properties of brass, including its excellent machinability, corrosion resistance, and non-magnetic nature, make it the preferred material for applications demanding high accuracy and longevity. Its uniform grain structure and thermal conductivity further enhance its utility in precision tooling and calibration equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the brass sheet will be installed is clean, dry, and free of debris. 2. Carefully position the brass sheet according to design specifications, verifying alignment with mounting points. 3. Secure the brass sheet using appropriate fasteners, ensuring even pressure distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of fasteners which can cause galvanic corrosion with brass. | Utilize stainless steel or brass fasteners to maintain material compatibility and prevent corrosive reactions. |
| Over-tightening fasteners, leading to potential warping or cracking of the brass sheet. | Apply fasteners with moderate torque, using a torque wrench if precise control is required, to avoid stressing the material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision calibration fixtures, Master gauges and templates, Component inspection surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||