This high-grade carbon steel stock sheet, precisely manufactured at 0.903" thickness, 43" length, and 27" width, is specifically designed for robust pneumatic systems requiring exceptional material integrity and durability.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.903" |
| Length | 43" |
| Width | 27" |
Engineered for reliability and performance, this carbon steel stock sheet offers a substantial 0.903-inch thickness, providing superior structural integrity for high-pressure pneumatic applications. Its 43" x 27" dimensions offer ample material for fabrication of critical components. The inherent strength and formability of carbon steel make it ideal for demanding environments where resistance to impact and wear are paramount. This material is selected for its consistent mechanical properties, ensuring predictable behavior under operational stress and thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to cutting or machining. 2. Fabricate components according to engineered drawings, ensuring proper tolerances. 3. Perform necessary surface treatments or coatings as specified for the intended pneumatic environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly tempered carbon steel for high-pressure pneumatic components. | Always specify and procure carbon steel stock meeting precise engineering requirements for thickness, grade, and mechanical properties relevant to the application's pressure and environmental demands. |
| Inadequate surface preparation leading to premature corrosion or sealing failures in pneumatic systems. | Ensure all fabricated components undergo appropriate cleaning, deburring, and any specified surface treatments or coatings to prevent contamination and maintain system integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder construction, High-pressure pneumatic manifold fabrication, Pneumatic valve bodies and housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||