This robust carbon steel stock sheet, precisely manufactured to 0.902" thickness, 15" length, and 28" width, is engineered for demanding electrical and lighting applications. Its superior strength and formability ensure reliable performance in critical infrastructure.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.902" |
| Length | 15" |
| Width | 28" |
Specified by design engineers worldwide, this carbon steel stock sheet offers exceptional tensile strength and durability, crucial for electrical enclosures, lighting fixtures, and structural components within the electrical industry. With dimensions of 0.902" (22.91 mm) nominal thickness, 15" (381 mm) length, and 28" (711.2 mm) width, it provides ample material for a variety of fabrication processes including cutting, bending, and welding. The material's inherent magnetic properties also make it suitable for certain electromagnetic applications. Compliance with relevant industry standards for steel sheet is assumed for optimal performance and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and quality against project specifications. 2. Prepare the sheet for cutting or forming using appropriate safety equipment and tooling. 3. Fabricate and install according to detailed engineering drawings and electrical codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect gauge for structural integrity. | Always consult engineering drawings or load calculations to ensure the 0.902" thickness is adequate for the intended application's stress requirements. |
| Inadequate surface preparation before welding or coating. | Thoroughly clean the carbon steel surface of any rust, oil, or debris to ensure proper adhesion and prevent weld defects. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Mounts and Housings, Control Panel Backing Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||