This robust 0.902-inch thick carbon steel stock sheet, measuring 30 inches by 32 inches, is engineered for the rigors of pneumatic systems. Its superior strength and durability make it ideal for critical component fabrication.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.902" |
| Length | 30" |
| Width | 32" |
Designed for demanding industrial environments, this 0.902-inch thick carbon steel stock sheet offers exceptional structural integrity and wear resistance. Its precise dimensions of 30 inches in length and 32 inches in width ensure consistent performance in fabricated pneumatic components. The high-tensile strength of carbon steel allows it to withstand significant pressures and impacts common in pneumatic machinery, making it suitable for housings, mounting brackets, and structural elements within complex systems. It is an excellent choice for applications requiring a reliable and cost-effective material that can endure continuous operation and harsh environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to cutting. 2. Utilize appropriate cutting and machining techniques for 0.902" carbon steel. 3. Ensure all fabricated components meet design tolerances for seamless integration into pneumatic assemblies.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard mild steel for high-pressure pneumatic components. | Always select carbon steel grades with sufficient tensile strength and hardness for the intended pneumatic pressure and load requirements. |
| Inadequate surface preparation for welding or coating. | Thoroughly clean the carbon steel surface to remove rust, oil, and other contaminants before any subsequent fabrication processes to ensure optimal adhesion and weld quality. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder construction, Actuator housings, Mounting plates for pneumatic valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||