This high-performance 0.901-inch thick Nylon stock sheet provides exceptional durability, abrasion resistance, and a low coefficient of friction. Engineered for demanding industrial environments, it ensures reliable operation and extended service life in critical components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.901" |
| Length | 19" |
| Width | 18" |
Trusted by engineers across multiple sectors, this 0.901" thick Nylon stock sheet (19" x 18") offers a robust solution for demanding applications. Its inherent toughness, excellent wear resistance, and self-lubricating properties make it ideal for fabricating gears, bearings, wear pads, and structural components. The material's high tensile strength and impact resistance ensure consistent performance under significant mechanical stress and frequent use.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine or fabricate components from the cut sheet, adhering to design specifications. 3. Install fabricated parts into their intended application, ensuring proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper coolant or speed settings, leading to melting or chipping. | Utilize carbide-tipped saw blades and maintain appropriate cutting speeds with adequate coolant to prevent heat buildup and ensure clean cuts. |
| Over-tightening fasteners, causing stress concentrations and potential cracking of the nylon component. | Apply torque specifications recommended for nylon or use spring washers to allow for thermal expansion and prevent over-compression. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Gears and Rollers, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||