This 0.9" Schedule 160 seamless pipe, constructed from premium 304 stainless steel, offers exceptional strength and corrosion resistance for critical high-pressure fluid transfer systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 0.9" |
| Outside Diameter | 2.421" |
| Wall Thickness | 0.211" |
Built to exacting engineering tolerances, this 0.9" nominal pipe size (NPS) seamless pipe features a precise 2.421" outside diameter (OD) and a substantial 0.211" wall thickness, corresponding to Schedule 160. Fabricated from robust 304 stainless steel, it provides superior tensile strength, yield strength, and excellent resistance to a wide range of corrosive media, making it ideal for demanding applications where integrity and longevity are paramount. The seamless construction ensures uniform wall thickness and eliminates potential leak paths inherent in welded pipes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free from burrs, and properly beveled according to connection specifications. 2. Carefully align pipe sections to prevent stress on fittings and connections. 3. Secure connections using appropriate welding, threading, or flanging techniques, ensuring full penetration and leak-tight seals.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of pipe ends before joining. | Thoroughly clean pipe ends with a suitable solvent to remove all contaminants that could compromise weld integrity or seal effectiveness. |
| Over-tightening threaded connections, leading to damage. | Use appropriate torque values and sealing compounds as recommended for the specific fitting and thread type to prevent stripping or cracking. |
A: This Seamless Pipe, Schedule 160 is manufactured from 304 Stainless Steel.
A: High-pressure hydraulic systems, Chemical processing and transfer lines, Power generation (steam and feedwater lines).
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||