This high-density Nylon stock sheet offers exceptional strength, abrasion resistance, and low friction. Precisely manufactured to 0.897" thickness, 13" width, and 48" length, it's engineered for superior performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.897" |
| Length | 13" |
| Width | 48" |
Specified by design engineers worldwide, this Nylon stock sheet is manufactured from premium-grade polyamide, offering a tensile strength exceeding 12,000 psi and a Rockwell hardness of R80-95. Its excellent wear resistance, chemical inertness, and self-lubricating properties make it suitable for gears, bearings, wear pads, and structural components in machinery, automotive, and material handling sectors. The precise 0.897" thickness ensures consistent machining and reliable dimensional stability for critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines accurately on the Nylon stock sheet. 2. Utilize a carbide-tipped saw blade suitable for plastics with appropriate feed rates to prevent melting. 3. Deburr edges after cutting to ensure a smooth finish and prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard wood-cutting saw blade, which can lead to melting and poor cut quality. | Employ a saw blade specifically designed for cutting plastics, such as a carbide-tipped blade with a fine tooth pitch. |
| Excessive feed rate during cutting, causing heat buildup and material deformation. | Maintain a consistent and moderate feed rate to allow the blade to cut cleanly without generating excessive heat. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Bearing surfaces, Gears and sprockets, Wear strips and guides, Bushings and sleeves, Machined components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||