This high-quality lubricating brass stock sheet, precisely engineered at 0.896" thickness, 47" length, and 44" width, delivers exceptional performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.896" |
| Length | 47" |
| Width | 44" |
A proven choice for industrial professionals, this brass stock sheet offers superior self-lubricating properties due to its specific alloy composition, minimizing friction and wear in dynamic applications. The material's inherent machinability allows for precise component fabrication, while its corrosion resistance ensures longevity in diverse operating conditions. The robust dimensions of 0.896" thickness, 47" length, and 44" width provide ample material for a wide range of manufacturing needs, including bushings, bearings, and wear plates where reduced maintenance and extended service life are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to its intended application, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of a designated lubricating grade. | Always select a brass alloy specifically formulated for lubricating properties to achieve optimal friction reduction. |
| Inadequate surface preparation of mating components. | Thoroughly clean and deburr all surfaces that will come into contact with the brass for smooth operation and to prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Journal Bearings, Thrust Washers, Bushings, Wear Strips, Sliding Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||