This heavy-duty carbon steel stock sheet, precisely sized at 34" x 22" with a substantial 0.891" thickness, is engineered for demanding suspending and bracing applications requiring exceptional structural integrity and load support.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.891" |
| Length | 34" |
| Width | 22" |
Manufactured under strict quality controls, this carbon steel stock sheet offers a nominal thickness of 0.891 inches (22.63 mm), a length of 34 inches (863.6 mm), and a width of 22 inches (558.8 mm). Constructed from high-grade carbon steel, it exhibits excellent tensile strength, yield strength, and hardness, making it ideally suited for applications where significant static and dynamic loads must be securely supported. Its robust composition ensures resistance to deformation and fatigue under continuous stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free from debris. 2. Precisely cut sheet to required dimensions using appropriate cutting tools. 3. Securely fasten sheet using heavy-duty fasteners (bolts, welds) as per engineering specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners for attachment. | Always utilize fasteners (e.g., high-tensile bolts, structural rivets) that meet or exceed the load requirements of the suspended or braced structure. |
| Inadequate surface preparation leading to poor adhesion or premature corrosion. | Thoroughly clean and degrease the contact surfaces before installation to ensure optimal contact and prevent corrosion initiation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty structural bracing in industrial facilities, Support platforms for heavy machinery, Custom fabrication of load-bearing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||