This high-quality brass stock sheet, measuring 0.890" thick, 28" in length, and 23" in width, is specifically designed for lubricating applications. Its inherent material properties provide excellent wear resistance and low friction coefficients.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.890" |
| Length | 28" |
| Width | 23" |
Trusted by engineers across multiple sectors, this 0.890" thick brass stock sheet exhibits superior self-lubricating characteristics, making it ideal for components requiring reduced friction and extended service life. The inherent machinability and corrosion resistance of brass alloys ensure consistent performance under demanding industrial conditions. Its substantial dimensions of 28" x 23" offer versatility for custom fabrication of bearings, bushings, and sliding surfaces in machinery, automotive, and aerospace applications where lubrication is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to be lubricated is clean and free of debris. 2. Precisely cut or machine the brass stock sheet to the required dimensions. 3. Securely fasten the fabricated brass component to the intended application, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a brass alloy with insufficient wear resistance for the application's load. | Verify the brass alloy's specifications meet or exceed the required wear and friction performance benchmarks for the intended use case. |
| Improper surface preparation leading to premature wear or seizure. | Thoroughly clean and deburr all mating surfaces before installation to ensure smooth operation and optimal lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings and sleeve bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||