This 0.889" thick carbon steel stock sheet is engineered for demanding electrical and lighting applications. Its substantial gauge provides exceptional structural integrity and durability for critical components.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.889" |
| Length | 27" |
| Width | 21" |
Purpose-built for heavy-duty applications, this 0.889" thick carbon steel stock sheet offers superior strength and rigidity. Measuring 27" in length and 21" in width, it is manufactured from high-grade carbon steel, ensuring excellent load-bearing capacity and resistance to deformation under stress. Its robust nature makes it ideal for constructing robust electrical enclosures, supporting heavy lighting fixtures, and fabricating custom industrial components where reliability and structural integrity are paramount. The material's inherent properties facilitate easy fabrication and welding for a wide range of custom solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to cutting or fabrication. 2. Cut to desired dimensions using appropriate industrial cutting tools. 3. Fabricate and integrate into the electrical or lighting system according to design specifications, ensuring secure fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-load applications. | Always select a steel gauge that exceeds the calculated load requirements to prevent structural failure and ensure long-term performance. |
| Inadequate surface preparation before coating or painting. | Thoroughly clean and degrease the carbon steel surface to ensure proper adhesion of any protective coatings, preventing premature corrosion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty electrical enclosures, Industrial lighting fixture mounting, Custom support brackets and frames, Power distribution panel fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||