This premium lubricating grade Nylon stock sheet offers exceptional wear resistance and self-lubricating properties. Its robust dimensions make it ideal for fabricating custom components requiring low friction and high load-bearing capacity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.886" |
| Length | 26" |
| Width | 27" |
Built to exacting engineering tolerances, this 0.886" thick Nylon stock sheet delivers consistent performance. Composed of high-density Nylon 6/6, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction, making it ideal for applications requiring reduced wear and minimal lubrication. Its dimensional stability ensures precise fit and function in demanding environments, from wear pads and bushings to guide rails and rollers. The material's inherent lubricity minimizes galling and seizing under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely machine the Nylon stock sheet to the required dimensions using standard cutting and shaping tools. 2. Ensure mating surfaces are clean and free of debris before assembly. 3. Secure the fabricated Nylon component using appropriate fasteners, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining at excessive speeds or with dull tooling, leading to heat buildup and material degradation. | Utilize sharp cutting tools and appropriate feed rates for Nylon to manage heat and ensure clean cuts. |
| Improperly securing components, causing excessive pressure on the Nylon and potential cracking or deformation. | Apply even pressure during fastening and use washers to distribute load, avoiding direct contact with sharp edges. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Bushings and bearings, Rollers and slide components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||