This high-performance brass stock sheet is engineered for robust filtering systems. Its substantial thickness and brass composition ensure superior durability and chemical resistance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.885" |
| Length | 20" |
| Width | 32" |
Purpose-built for heavy-duty applications, this brass stock sheet offers exceptional structural integrity and filtration performance. With a precise thickness of 0.885 inches, a generous length of 20 inches, and a width of 32 inches, it is fabricated from high-grade brass known for its excellent corrosion resistance and non-sparking properties. These characteristics make it ideal for use in aggressive chemical processing, particulate separation, and high-pressure fluid management systems where reliability and longevity are paramount. The dense, uniform grain structure of the brass further enhances its efficacy in trapping fine particles while maintaining flow efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, flat, and free of debris. 2. Carefully position the brass stock sheet within the filtration housing, aligning it with designated mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent deformation. Avoid overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to sheet deformation. | Apply gradual, even pressure when securing the sheet. Utilize appropriate tools and torque specifications if available. |
| Inadequate cleaning of the mounting surface, causing premature seal failure or contamination. | Thoroughly clean and inspect the mounting surface for any dirt, debris, or imperfections before installing the brass sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Industrial Fluid Filtration, Particulate Separation Systems, Chemical Processing Strainers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||