This lubricating grade Nylon stock sheet is engineered for extreme wear and friction reduction. Its robust dimensions and inherent self-lubricating properties make it ideal for high-stress components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.884" |
| Length | 39" |
| Width | 28" |
Purpose-built for heavy-duty applications, this Nylon stock sheet boasts a substantial 0.884" thickness, a 39" length, and a 28" width. The material exhibits excellent tensile strength, chemical resistance, and a significantly low coefficient of friction, due to its integrated solid lubricants. This combination ensures superior performance in dynamic mechanical systems, reducing wear and extending component lifespan in environments subjected to continuous movement and significant load-bearing demands. Ideal for custom fabricating wear pads, bushings, and slide mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean mating surfaces to ensure optimal contact. 2. Precisely machine the Nylon stock sheet to the required dimensions and tolerances. 3. Securely fasten the fabricated component, ensuring even load distribution and avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Always degrease and ensure mating surfaces are free of debris and imperfections before installation. |
| Over-machining or creating sharp edges that can initiate stress fractures. | Employ appropriate tooling and speeds for Nylon, and always deburr edges after machining. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides in material handling equipment, Self-lubricating bushings and bearings, Chute liners and slide surfaces in high-friction environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||