High-performance brass stock sheet designed for lubricating applications. Its specific alloy composition and precise dimensions ensure optimal performance in demanding environments requiring self-lubricating properties.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.883" |
| Length | 34" |
| Width | 35" |
Precision-manufactured to tight tolerances, this 0.883" thick brass stock sheet boasts dimensions of 34" in length and 35" in width. Formulated with essential additives for inherent lubricity, this material exhibits excellent bearing properties and a low coefficient of friction, minimizing wear and heat generation. Its robust mechanical strength and corrosion resistance make it ideal for sliding components, bushings, and wear plates in machinery and industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both mating surfaces to remove any debris or contaminants. 2. Ensure the brass stock sheet is accurately cut and deburred to the required dimensions. 3. Securely fasten the brass stock sheet to its intended mounting surface, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Always ensure surfaces are clean and free of grit or foreign particles before installation. |
| Overtightening fasteners, causing deformation or stress. | Apply appropriate torque values during fastening to avoid material distortion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear plates in conveyor systems, Slide bearings for mechanical assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||