This robust 0.879-inch thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Engineered for superior performance in demanding material handling scenarios, it provides reliable protection and durability.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.879" |
| Length | 45" |
| Width | 37" |
Designed for demanding industrial environments, this 0.879" thick polycarbonate stock sheet (45" x 37") delivers unparalleled impact strength, exceeding that of glass by over 200 times. Its inherent UV resistance prevents yellowing and degradation, ensuring long-term clarity and performance. This material is ideal for machine guarding, impact shields, and robust containment solutions in high-traffic material handling areas where durability and visibility are paramount. Its temperature resistance allows for use across a broad operational spectrum.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, taking care to avoid scratching the surface. 3. Secure the sheet using appropriate fasteners designed for polycarbonate, ensuring even pressure distribution to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drilling bits without a pilot hole. | Always drill a pilot hole and use a sharp drill bit specifically designed for plastics to prevent cracking. |
| Over-tightening fasteners, leading to stress concentration. | Utilize washers and do not overtighten fasteners. Leave slight play to accommodate thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guards, Impact Shields, Protective Barriers, Conveyor System Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||