This premium brass stock sheet, precisely manufactured to 0.879" thickness, offers exceptional machinability and durability. Its dimensions of 22" x 33" make it ideal for a wide range of sawing and cutting projects.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.879" |
| Length | 22" |
| Width | 33" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.879 inches (22.33 mm) and is cut to a precise 22-inch by 33-inch (558.8 mm x 838.2 mm) dimension. Engineered with a standard brass alloy composition, it exhibits excellent tensile strength and resistance to corrosion, making it suitable for demanding fabrication and assembly processes. Its uniform grain structure ensures clean cuts and superior surface finish when subjected to sawing and cutting operations, minimizing material waste and tool wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the brass stock sheet using a scribe or permanent marker. 2. Secure the sheet firmly to a stable cutting surface using clamps, ensuring no movement during operation. 3. Select an appropriate saw blade (e.g., abrasive cutoff wheel, carbide-tipped saw blade) suitable for cutting brass and proceed with the cut, maintaining a steady feed rate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to rough cuts and increased heat. | Always use a sharp, specifically designed blade for cutting brass to ensure clean edges and prevent material overheating. |
| Not properly securing the stock sheet, causing vibrations and inaccurate cuts. | Utilize robust clamps to firmly hold the brass sheet in place, eliminating any potential movement during the cutting process. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom metal fabrication, Prototyping and design, Decorative metalwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||