This 0.879" thick brass stock sheet is engineered for superior lubricating properties. Its inherent material characteristics minimize friction and wear, ensuring reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.879" |
| Length | 45" |
| Width | 48" |
A proven choice for industrial professionals, this brass stock sheet boasts exceptional tribological properties for self-lubricating applications. With precise dimensions of 0.879" thickness, 45" length, and 48" width, it's manufactured from high-quality brass alloy known for its excellent wear resistance and low coefficient of friction. This material is ideal for components requiring smooth sliding surfaces, reduced heat generation, and extended operational life in machinery, bushings, and bearing applications where traditional lubrication methods may be impractical or insufficient.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the component. 3. Securely fasten the fabricated brass component to the intended application using appropriate mechanical fasteners or bonding agents.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of a specific lubricating alloy. | Verify the material specification to ensure it's a brass alloy formulated for lubricating properties, offering the lowest coefficient of friction. |
| Improper surface preparation of mating components. | Thoroughly clean and de-grease both the brass stock sheet component and the mating surface to prevent premature wear or binding. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Slide plates and guides, Wear strips for conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||