This premium brass stock sheet, designed for lubricating applications, offers superior friction reduction and wear resistance. Its substantial 0.877" thickness and generous 30" x 23" dimensions make it ideal for demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.877" |
| Length | 30" |
| Width | 23" |
Trusted by engineers across multiple sectors, this brass stock sheet is manufactured to exacting standards for optimal performance in lubricating applications. With a precise thickness of 0.877 inches and dimensions of 30 inches by 23 inches, it provides a robust platform for creating wear surfaces and friction-reducing components. Brass's inherent self-lubricating properties, combined with its excellent machinability and corrosion resistance, make it a preferred material for bushings, bearings, and sliding mechanisms in heavy-duty machinery and precision equipment where consistent lubrication is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or contaminants. 2. Carefully position the brass stock sheet according to the design specifications. 3. Secure the stock sheet using appropriate fasteners or adhesive, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thinner material where high load-bearing is required. | Select a stock sheet with adequate thickness, such as this 0.877" option, to prevent deformation and ensure longevity under stress. |
| Improper surface preparation leading to poor adhesion or premature wear. | Always ensure both the brass stock and the mating surface are meticulously cleaned and free of oils, grease, or particulate matter before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces for low-speed, high-load applications, Wear plates and guides in sliding mechanisms, Self-lubricating bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||