This robust carbon steel stock sheet, measuring 38" x 25" x 0.869", offers exceptional strength and durability. It's an ideal base material for fabricating electrical enclosures, lighting fixtures, and structural components.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.869" |
| Length | 38" |
| Width | 25" |
Engineered for reliability and performance, this 0.869-inch thick carbon steel stock sheet provides a substantial and stable platform for demanding electrical and lighting applications. Its high tensile strength and consistent material properties ensure structural integrity and long-term performance under load and environmental conditions. The 38-inch length and 25-inch width offer ample surface area for fabrication, allowing for efficient cutting and forming into custom enclosures, mounting brackets, and protective housings. This material is well-suited for applications requiring a balance of cost-effectiveness and robust mechanical performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired cut lines on the carbon steel sheet. 2. Utilize appropriate cutting tools (e.g., shear, plasma cutter) to achieve precise dimensions. 3. Prepare edges for welding or fastening by deburring and cleaning.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for 0.869" thickness, leading to poor edge quality or tool damage. | Employ industrial-grade cutting machinery specifically designed for thick gauge carbon steel to ensure clean, accurate cuts. |
| Inadequate surface preparation before painting or coating, resulting in premature corrosion or adhesion failure. | Thoroughly degrease and remove all mill scale, rust, and contaminants from the surface prior to applying any protective finishes. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Housings, Support Structures and Brackets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||