This 0.868" thick, 42" x 14" Nylon stock sheet is engineered for robust pneumatic system components. Its inherent strength and wear resistance ensure longevity in demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.868" |
| Length | 42" |
| Width | 14" |
Manufactured under strict quality controls, this 0.868" thick Nylon stock sheet boasts exceptional tensile strength and abrasion resistance, making it ideal for fabricating wear pads, seals, and structural components within pneumatic systems. The material's low coefficient of friction minimizes energy loss and extends service life, while its dimensional stability ensures consistent performance across a wide operating temperature range. Its resistance to common industrial lubricants and hydraulic fluids further enhances its suitability for critical pneumatic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 2. Ensure all mating surfaces are clean and free of contaminants. 3. Securely fasten the fabricated component according to pneumatic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or uneven edges. | Employ specialized cutting tools like sharp router bits or band saw blades designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the Nylon. | Use appropriate torque settings and consider using washers to distribute the load evenly when fastening Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Wear strips and guide blocks, Sealing elements and gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||