This premium nylon stock sheet, engineered at 0.867" thickness, provides exceptional durability and low friction for a wide range of industrial applications. Its robust composition ensures longevity in demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.867" |
| Length | 35" |
| Width | 24" |
Manufactured under strict quality controls, this 0.867" thick nylon stock sheet boasts a substantial 35" length and 24" width, offering a generous surface area for fabrication. Composed of high-performance nylon, it exhibits excellent tensile strength, superior abrasion resistance, and a low coefficient of friction, making it ideal for reducing wear in moving parts. Its chemical inertness also contributes to its suitability for diverse operational settings, ensuring reliability and extended service life in critical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Secure the cut nylon piece using suitable fasteners or adhesives, ensuring proper alignment with mating components. 3. If machining, utilize carbide-tipped tooling and adequate cooling to prevent thermal degradation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ carbide-tipped or diamond-coated blades specifically designed for cutting nylon and other polymers. Maintain a consistent feed rate and use coolant if necessary. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the nylon. | Use washers to distribute load and tighten fasteners only until snug. If possible, employ self-locking nuts or thread-locking compounds for vibration resistance without excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide components, Bushings and bearings, Gaskets and seals in chemical processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||